Online calculator calculates U-shaped stairs with 180 degrees turn, three flights and landing. Determines the angle of the stairs, the sizes of steps, run and rise, material consumption, creates all necessary drawings and 3D model of the staircase.
All you need to do is enter the initial dimensions and start the calculation. Within a few seconds you will receive the calculation results for your future 180 degrees turn staircase with landings and three flights.
The program will do all the work for you, save a lot of your time!
Please make sure your stair design complies with all local building codes and regulations requirements! It is very crucial step.
Calculation of 180 degrees turn wooden stairs with three flights and landing?
Simply enter the initial dimensions of your future staircase. You need to measure some dimenions , and some of them you can choose from optimum dimensional ranges for the convenience and safety of the stairs:
Option feature | Optimal |
The staircase angle | 29 - 35 degrees |
Riser height | 15 - 17 cm / 7 3/4″ max |
The tread depth | 27 - 30 cm / min 10 inches, 254 mm |
The tread thickness | 4 - 5 cm |
The riser thickness | 2.5 - 3 cm |
The stringer thickness | 5 - 7 cm |
Stairways width | 94 - 110 cm / min 36 inches |
The number of steps per flight | from 3 to 18 |
The width of the overhang of a tread (nosings) | 3 cm/ between 19 mm and 32 mm |
The height of handrails | 90 cm |
The headroom | not less than 203 cm / 6 feet 8 inches |
You need to measure the height and length of the future of the U-shaped staircase with three flights. Height is measured from the clean floor of the top floor ceiling of the lower floor, between which it is planned to build three-flight staircase.
Changing the source data - for example, the number of stages, you will be able to pick the perfect design stairs for your home.
I advise you to choose for each flight of stairs an odd number of steps to make the stairs easier to climb and descend.